Information in tkutils.set_exception(): Set excption handler sys.excepthook #======================================================== # optimize_ATLAS #======================================================== Check infile parameter: Input file [D:/git/tkProg/tkprog_COE/ATLAS/optimize_ATLAS/TFT_simple/input_data.xlsx] is given. Paramter file is set to [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in]. Update parameters from command line arguments Read configration file [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in] Read parameters from [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in] alpha: 0 atlas_cmd_linux: /home/share/sedatools/bin/deckbuild atlas_cmd_win: c:/sedatools/exe/deckbuild atlas_options_linux: -run -ascii atlas_options_win: -run atlasfile: IV_Vd01.in atlaslogfile: IdVg.log atlaslogfile_list: ['IdVg.log_303.0.log'] calfile: idvg_calc.dat Cfile: -- cv: daemon: 0 datafile: IVobs.xlsx defectaccfile: dos.out defectdonfile: defdon.out Eg: 2.8 ega1: 1.35e+18 ega2: 0.05 ega3: 0.1 fdisconnect_backward_data: 1 ffitfiles: 1 fhistory: 1 figsize: [8, 6] file1: fit file2: file3: file4: file5: fitfile: IVfit.xlsx fmax_plot: 10 fmax_record: 10 fmin_max_mlr: 60 fontsize: 16 fplot: 1 graphupdateinterval: 10 help: 0 hidden_layer_sizes: 3,3,3 historyfile: /home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx infile: D:/git/tkProg/tkprog_COE/ATLAS/optimize_ATLAS/TFT_simple/input_data.xlsx interval: 50 ix_plot: 0 jac: 3-points kvariance: 6 l1_ratio: 0.5 legend_fontsize: 12 logfile: IV_Vd01-out.txt max_num_probes: 1 method: nelder-mead mode: fit ncal_error: 11 nga1: 3.048e+19 nga2: 0.664 nga3: 0 nmaxcall: 10000 nmaxdata: 50 nmaxiter: 1000 nohup: 0 nparents: 5 nsample: 100 nta1: 1.08e+18 num_rand_basis: 400 nx: 5 original_data_file: measured_IV.csv outfile: IVobs.xlsx parameterfile: D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in plot_interval: 5 print_interval: 5 run: 1 score_mode: EI seed: T: 303 target_var: cdp templatepath: ./template test_data_ratio: 0.2 tol: 1e-08 trainfile: update_mode: direct use_cv: 0 use_tkplt: 0 wga1: 0.035 wga2: 1e+19 wga3: 2.62 wta1: 9.25 x0: 0 x1: 1 x_scale: xatol: 0.0001 xlabel: Vg (V) y_scale: log ylabel: Id (A) infile: D:/git/tkProg/tkprog_COE/ATLAS/optimize_ATLAS/TFT_simple/input_data.xlsx parameterfile: D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in stop file: D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\stop Eg=2.8 eV T=303 K Non-linear LSQ fitting: In tkminimize_func.read_parameters(): Read parameters from [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in] mode : fit fplot : 1 fhistory : 1 ffitfiles : 1 stop path : D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\stop template path : ./template Observed IV infile : D:/git/tkProg/tkprog_COE/ATLAS/optimize_ATLAS/TFT_simple/input_data.xlsx Observed IV outfile : IVobs.xlsx ATLAS input file : IV_Vd01.in ATLAS log file : IdVg.log ATLAS cal file : idvg_calc.dat ATLAS console output file: IVobs.xlsx config parameter file : D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in fitting parameter file: D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data_parameters.csv history file : /home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx data file (transfer) : IVobs.xlsx Fitting configuration method : nelder-mead jac : 3-points tol : 1e-08 nmaxiter : 1000 nmaxcall : 10000 y_scale : log Fitting parameters red from [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data_parameters.csv]: 00: cdp= 9.47137e+17 cm-3 (id=1) (linear=0) penality: 1 * (1e+13 - 1e+20) 01: mun= 10.1568 cm2/Vs (id=1) (linear=1) penality: 1 * (0.01 - 30) 02: nta= 2.69086e+19 cm-3/eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 03: wta= 0.0160674 eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 04: nga= 1.98787e+18 cm-3/eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 05: wga= 0.753005 eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 06: ntd= 2.28434e+19 eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 07: wtd= 0.00142103 cm-3/eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 08: ngd= 0 cm-3/eV (id=0) (linear=0) penality: 1 * (0 - 1e+23) 09: egd= 2.62 eV (id=0) (linear=0) penality: 1 * (1.5 - 4) 10: wgd= 0.1 eV (id=0) (linear=0) penality: 1 * (0.0001 - 2) Build initial simplex 0: 9.471e+17 10.16 2.691e+19 0.01607 1.988e+18 0.753 2.284e+19 0.001421 1: 1.047e+18 10.16 2.691e+19 0.01607 1.988e+18 0.753 2.284e+19 0.001421 2: 9.471e+17 10.26 2.691e+19 0.01607 1.988e+18 0.753 2.284e+19 0.001421 3: 9.471e+17 10.16 2.791e+19 0.01607 1.988e+18 0.753 2.284e+19 0.001421 4: 9.471e+17 10.16 2.691e+19 0.01707 1.988e+18 0.753 2.284e+19 0.001421 5: 9.471e+17 10.16 2.691e+19 0.01607 2.988e+18 0.753 2.284e+19 0.001421 6: 9.471e+17 10.16 2.691e+19 0.01607 1.988e+18 0.763 2.284e+19 0.001421 7: 9.471e+17 10.16 2.691e+19 0.01607 1.988e+18 0.753 2.384e+19 0.001421 8: 9.471e+17 10.16 2.691e+19 0.01607 1.988e+18 0.753 2.284e+19 0.01142 Parameter file: [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in] Fitting parameter file: [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data_parameters.csv] Read input data from [D:/git/tkProg/tkprog_COE/ATLAS/optimize_ATLAS/TFT_simple/input_data.xlsx] minimize_function.read_input_data(): lib.read_original_input_data(): Read input data from [D:/git/tkProg/tkprog_COE/ATLAS/optimize_ATLAS/TFT_simple/input_data.xlsx] read polyOS .xlsx file read Excel file (polyOS model): labels:['Vg (V)', 'Vd (V)', 'Id (A)', 'Id (calc)'] idx_VG: 0 idx_VD: 1 idx_ID: 2 Warning in read_input_data_polyOS_xlsx(): Can not find T data with label [T] nor [Temperature] T is assumed to be 303 K Save input data repeat to [IVobs.xlsx] Fitting parameters: 00: cdp= 9.47137e+17 cm-3 (id=1) (linear=0) penality: 1 * (1e+13 - 1e+20) 01: mun= 10.1568 cm2/Vs (id=1) (linear=1) penality: 1 * (0.01 - 30) 02: nta= 2.69086e+19 cm-3/eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 03: wta= 0.0160674 eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 04: nga= 1.98787e+18 cm-3/eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 05: wga= 0.753005 eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 06: ntd= 2.28434e+19 eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 07: wtd= 0.00142103 cm-3/eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 08: ngd= 0 cm-3/eV (id=0) (linear=0) penality: 1 * (0 - 1e+23) 09: egd= 2.62 eV (id=0) (linear=0) penality: 1 * (1.5 - 4) 10: wgd= 0.1 eV (id=0) (linear=0) penality: 1 * (0.0001 - 2) ix_plot: 0 Vg (V) Calculate initial function update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:17:52 vars: 9.471e+17 10.16 2.691e+19 0.01607 1.988e+18 0.753 2.284e+19 0.001421 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Ended at 2024/11/21 16:19:28. Collapsed time: 96.06409287452698 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #1: fmin= 0.06986 xdiff= 0 9.47137e+17 10.1568 2.69086e+19 0.0160674 1.98787e+18 0.753005 2.28434e+19 0.00142103 0 2.62 0.1 Save last input and calculation data to [fit0001.xlsx] Initial function: fmin= 0.06986 Initial data: Vg (V) Vd (V) T (K) Id (A) initial 1 0.1 303 2.106e-08 2.402e-08 2 0.1 303 6.322e-08 5.392e-08 4 0.1 303 1.885e-07 1.773e-07 6 0.1 303 3.555e-07 3.626e-07 8 0.1 303 5.555e-07 5.794e-07 10 0.1 303 7.824e-07 8.133e-07 12 0.1 303 1.031e-06 1.057e-06 14 0.1 303 1.298e-06 1.308e-06 16 0.1 303 1.581e-06 1.563e-06 18 0.1 303 1.875e-06 1.822e-06 20 0.1 303 2.18e-06 2.083e-06 fini=0.0698616292413084 Save input and initial data to [IVobs.xlsx] Initial plot method: nelder-mead plot_std: False Optimize: Variables 00: cdp= 9.47137e+17 cm-3 (id=1) (linear=0) penality: 1 * (1e+13 - 1e+20) 01: mun= 10.1568 cm2/Vs (id=1) (linear=1) penality: 1 * (0.01 - 30) 02: nta= 2.69086e+19 cm-3/eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 03: wta= 0.0160674 eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 04: nga= 1.98787e+18 cm-3/eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 05: wga= 0.753005 eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 06: ntd= 2.28434e+19 eV (id=1) (linear=0) penality: 1 * (0 - 1e+23) 07: wtd= 0.00142103 cm-3/eV (id=1) (linear=0) penality: 1 * (0.0001 - 2) 08: ngd= 0 cm-3/eV (id=0) (linear=0) penality: 1 * (0 - 1e+23) 09: egd= 2.62 eV (id=0) (linear=0) penality: 1 * (1.5 - 4) 10: wgd= 0.1 eV (id=0) (linear=0) penality: 1 * (0.0001 - 2) Optimizing parameters: method =nelder-mead nmaxiter=1000 tol =1e-08 xatol =0.0001 optpk=[9.471370670748554e+17, 10.156772533336166, 2.6908586961849614e+19, 0.016067367875377, 1.9878671538341448e+18, 0.7530049136992361, 2.2843432189441376e+19, 0.0014210260862172067] Start minimization: Normalized diffrence of parameters: 0 update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:19:29 vars: 1.047e+18 10.16 2.691e+19 0.01607 1.988e+18 0.753 2.284e+19 0.001421 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Ended at 2024/11/21 16:20:34. Collapsed time: 65.04064607620239 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.0119373 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #2: fmin= 0.5919 xdiff= 0.01194 1.04714e+18 10.1568 2.69086e+19 0.0160674 1.98787e+18 0.753005 2.28434e+19 0.00142103 0 2.62 0.1 Save last input and calculation data to [fit0002.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:20:34 vars: 9.471e+17 10.26 2.691e+19 0.01607 1.988e+18 0.753 2.284e+19 0.001421 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue Ended at 2024/11/21 16:21:40. Collapsed time: 66.03478002548218 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.0119994 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #3: fmin= 0.07003 xdiff= 0.012 9.47137e+17 10.2568 2.69086e+19 0.0160674 1.98787e+18 0.753005 2.28434e+19 0.00142103 0 2.62 0.1 Save last input and calculation data to [fit0003.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:21:40 vars: 9.471e+17 10.16 2.791e+19 0.01607 1.988e+18 0.753 2.284e+19 0.001421 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue Ended at 2024/11/21 16:22:45. Collapsed time: 65.04024028778076 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.00464175 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #4: fmin= 0.0701 xdiff= 0.004642 9.47137e+17 10.1568 2.79086e+19 0.0160674 1.98787e+18 0.753005 2.28434e+19 0.00142103 0 2.62 0.1 Save last input and calculation data to [fit0004.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:22:45 vars: 9.471e+17 10.16 2.691e+19 0.01707 1.988e+18 0.753 2.284e+19 0.001421 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue Ended at 2024/11/21 16:24:19. Collapsed time: 94.05332446098328 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.00858489 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #5: fmin= 0.07106 xdiff= 0.008585 9.47137e+17 10.1568 2.69086e+19 0.0170674 1.98787e+18 0.753005 2.28434e+19 0.00142103 0 2.62 0.1 Save last input and calculation data to [fit0005.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:24:19 vars: 9.471e+17 10.16 2.691e+19 0.01607 2.988e+18 0.753 2.284e+19 0.001421 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue Ended at 2024/11/21 16:25:55. Collapsed time: 96.06607007980347 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.0424721 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #6: fmin= 4.024 xdiff= 0.04247 9.47137e+17 10.1568 2.69086e+19 0.0160674 2.98787e+18 0.753005 2.28434e+19 0.00142103 0 2.62 0.1 Save last input and calculation data to [fit0006.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:25:55 vars: 9.471e+17 10.16 2.691e+19 0.01607 1.988e+18 0.763 2.284e+19 0.001421 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Ended at 2024/11/21 16:26:59. Collapsed time: 64.03854155540466 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.0418679 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #7: fmin= 0.1473 xdiff= 0.04187 9.47137e+17 10.1568 2.69086e+19 0.0160674 1.98787e+18 0.763005 2.28434e+19 0.00142103 0 2.62 0.1 Save last input and calculation data to [fit0007.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:26:59 vars: 9.471e+17 10.16 2.691e+19 0.01607 1.988e+18 0.753 2.384e+19 0.001421 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue Ended at 2024/11/21 16:28:34. Collapsed time: 95.0631263256073 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.00549255 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #8: fmin= 0.06986 xdiff= 0.005493 9.47137e+17 10.1568 2.69086e+19 0.0160674 1.98787e+18 0.753005 2.38434e+19 0.00142103 0 2.62 0.1 Save last input and calculation data to [fit0008.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:28:34 vars: 9.471e+17 10.16 2.691e+19 0.01607 1.988e+18 0.753 2.284e+19 0.01142 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue Ended at 2024/11/21 16:30:10. Collapsed time: 96.0603666305542 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.109573 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #9: fmin= 0.06986 xdiff= 0.1096 9.47137e+17 10.1568 2.69086e+19 0.0160674 1.98787e+18 0.753005 2.28434e+19 0.011421 0 2.62 0.1 Save last input and calculation data to [fit0009.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:30:10 vars: 9.721e+17 10.18 2.716e+19 0.01632 9.879e+17 0.7555 2.309e+19 0.003921 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue Ended at 2024/11/21 16:31:16. Collapsed time: 65.04161286354065 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.103487 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #10: fmin= 1.801 xdiff= 0.1035 9.72137e+17 10.1818 2.71586e+19 0.0163174 9.87867e+17 0.755505 2.30934e+19 0.00392103 0 2.62 0.1 Save last input and calculation data to [fit0010.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:31:16 vars: 9.659e+17 10.18 2.71e+19 0.01625 1.488e+18 0.7549 2.303e+19 0.003296 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue Ended at 2024/11/21 16:32:20. Collapsed time: 64.03987455368042 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.046504 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #11: fmin= 1.268 xdiff= 0.0465 9.65887e+17 10.1755 2.70961e+19 0.0162549 1.48787e+18 0.75488 2.30309e+19 0.00329603 0 2.62 0.1 Save last input and calculation data to [fit0011.xlsx] tkFit_mxy_flex._callback(): iter: 0 icall: 12 cdp : 9.471e+17 cm-3 mun : 10.16 cm2/Vs nta : 2.691e+19 cm-3/eV wta : 0.01607 eV nga : 1.988e+18 cm-3/eV wga : 0.753 eV ntd : 2.284e+19 eV wtd : 0.01142 cm-3/eV ngd : 0 cm-3/eV egd : 2.62 eV wgd : 0.1 eV Normalized diffrence of parameters: 0.0943729 tkFit_mxy_flex._callback(): f= 0.0698616 xdiff= 0 Save configuration parameters to [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in] Save fitting parameters to [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data_parameters.csv] (save_parameters) update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:32:20 vars: 9.534e+17 10.16 2.697e+19 0.01613 2.488e+18 0.7536 2.291e+19 0.002046 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Ended at 2024/11/21 16:33:55. Collapsed time: 95.05817031860352 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.105643 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #12: fmin= 1.995 xdiff= 0.1056 9.53387e+17 10.163 2.69711e+19 0.0161299 2.48787e+18 0.75363 2.29059e+19 0.00204603 0 2.62 0.1 Save last input and calculation data to [fit0012.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:33:55 vars: 9.628e+17 10.17 2.706e+19 0.01622 1.738e+18 0.7546 2.3e+19 0.002984 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Ended at 2024/11/21 16:35:29. Collapsed time: 94.05792617797852 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.0544542 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #13: fmin= 0.8149 xdiff= 0.05445 9.62762e+17 10.1724 2.70648e+19 0.0162236 1.73787e+18 0.754567 2.29997e+19 0.00298353 0 2.62 0.1 Save last input and calculation data to [fit0013.xlsx] tkFit_mxy_flex._callback(): iter: 1 icall: 15 cdp : 9.471e+17 cm-3 mun : 10.16 cm2/Vs nta : 2.691e+19 cm-3/eV wta : 0.01607 eV nga : 1.988e+18 cm-3/eV wga : 0.753 eV ntd : 2.284e+19 eV wtd : 0.01142 cm-3/eV ngd : 0 cm-3/eV egd : 2.62 eV wgd : 0.1 eV Normalized diffrence of parameters: 0.0937115 tkFit_mxy_flex._callback(): f= 0.0698616 xdiff= 0 Save configuration parameters to [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data.in] Save fitting parameters to [D:\git\tkProg\tkprog_COE\ATLAS\optimize_ATLAS\TFT_simple\input_data_parameters.csv] (save_parameters) update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:35:30 vars: 9.565e+17 10.17 2.7e+19 0.01616 2.238e+18 0.7539 2.294e+19 0.002359 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Ended at 2024/11/21 16:37:04. Collapsed time: 94.07520318031311 s optimize_ATLAS_mf.read_cal_data(): Read input data from [IdVg.log_303.0.log] read ATLAS log file from [IdVg.log_303.0.log] Normalized diffrence of parameters: 0.100177 tkFit_mxy_flex.save_history(): Add fmin and parameters to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] Warning in tkFit_lib.add_history_xlsx(): Could not write to [/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx] due to error [[Errno 2] No such file or directory: '/home/share/tkProg/tkprog_Linux/ATLAS/optimize_ATLAS/TFT_simple/input_data-history.xlsx']. Ignore DB #14: fmin= 0.9378 xdiff= 0.1002 9.56512e+17 10.1661 2.70023e+19 0.0161611 2.23787e+18 0.753942 2.29372e+19 0.00235853 0 2.62 0.1 Save last input and calculation data to [fit0014.xlsx] update_mode=direct is specified. update ATLAS input file using the keyword 'IdVgSimulation' Delete [IV_Vd01.in] Make [IV_Vd01.in] from template [./template\IV_Vd01.in] C-Interpreter file template is not defined. Skip. Run [c:/sedatools/exe/deckbuild -run "IV_Vd01.in" -outfile "IV_Vd01-out.txt"] at 2024/11/21 16:37:04 vars: 9.612e+17 10.17 2.705e+19 0.01621 1.863e+18 0.7544 2.298e+19 0.002827 0 2.62 0.1 delete simulation data file [IdVg.log_303.0.log] Error: Can not delete [IdVg.log_303.0.log] due to error [[WinError 32] プロセスはファイルにアクセスできません。別のプロセスが使用中です。: 'IdVg.log_303.0.log']. Ignore and continue